Skip to content

DIN 985 M48

Hexagon lock nut,nylon insert

  • Thread M48 × 5
  • Spanner 75 mm

Dimensions and tolerances (mm)

DIN 985 nut cut in half, showing the thread, the nylon insert and the height hDIN 985 nut cut in half, showing the thread, the nylon insert and the height h
Side view, in section
DIN 985 nut seen from its face, with the width across flats (s) and the width across corners eDIN 985 nut seen from its face, with the width across flats (s) and the width across corners e
Face view
minnom.max
d
s
h

Values per DIN 985:1987.

In bold: the value shown in the table on the standard page.

Standard threads (mm)

Coarse (most common)
P = 5.00
Fine
P = 3.00

Tolerance class 6H (nut thread)

Verified data

We have checked this data against reliable sources.MechLab Geek accepts no liability for any use of this data or its consequences. Check it before you use it. Legal notice.Spotted a mistake? Let us know.

References

← All DIN 985 sizes