Skip to content

DIN 985 M16

Hexagon lock nut,nylon insert

Equivalent to ISO 10511 M16
  • Thread M16 × 2
  • Spanner 24 mm

Dimensions and tolerances (mm)

DIN 985 nut cut in half, showing the thread, the nylon insert and the height hDIN 985 nut cut in half, showing the thread, the nylon insert and the height h
Side view, in section
DIN 985 nut seen from its face, with the width across flats (s) and the width across corners eDIN 985 nut seen from its face, with the width across flats (s) and the width across corners e
Face view
minnom.max
d
s
e
h

Values per ISO 10511:2012. The values follow this edition; the current one is ISO 10511:2025. In DIN 985: h = 16.00

In bold: the value shown in the table on the standard page.

Standard threads (mm)

Coarse (most common)
P = 2.00
Fine
P = 1.50

Tolerance class 6H (nut thread)

Verified data

We have checked this data against reliable sources.MechLab Geek accepts no liability for any use of this data or its consequences. Check it before you use it. Legal notice.Spotted a mistake? Let us know.

References

← All DIN 985 sizes