DIN 965 M3.5
Countersunk head screw,cross recess
Equivalent to ISO 7046-1 M3.5Second-choice sizeSecond-choice size ISO 262 ranks thread sizes by preference. This one is second choice: harder to find and usually dearer. Prefer a first-choice size in new designs.
- Thread M3.5 × 0.6
- Bit PH2 · PZ2
- Tap drill Ø 2.9 mm
Dimensions and tolerances (mm)
| min | nom. | max | |
|---|---|---|---|
| d | |||
| dk | |||
| k | |||
| PH/PZ | |||
| m PH | |||
| t PH | |||
| m PZ | |||
| t PZ |
Values per ISO 7046-1:2011. In DIN 965: dk = 6.50 · k = 1.93 · m PH = 3.90 · m PZ = 3.70
In bold: the value shown in the table on the standard page.
Standard threads (mm)
d₂d₃
| P | d₂ | d₃ | |
|---|---|---|---|
| M3.5Coarse (most common) | 0.60 | 3.110 | 2.764 |
Profile per ISO 68-1 · tolerance class 6g
Standard lengths (mm)
Length l measured from the top of the head.
5681012141620253035
All lengths of this size are fully threaded.
Thread length b and lengths after ISO 7046-1: DIN 965 gives some other values.
Verified data
We have checked this data against reliable sources.MechLab Geek accepts no liability for any use of this data or its consequences. Check it before you use it. Legal notice.Spotted a mistake? Let us know.
References
- DIN 965:1990 Cross recessed countersunk flat head screws
- ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8
- ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
- ISO 68-1:1998 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads